• General Tasks for Block Hosts

    PDF

    On this page

    General Tasks for Block Hosts

    Modify Host LUN IDs

    The Modify Host LUN IDs feature lets you change the IDs of the LUNs so that you can achieve the same mapping view of LUNs for each host in a cluster. It also enables you to configure a bootable LUN that will allow a host to boot from the Storage Area Network (SAN).
    Procedure
    1. Under Access, select Hosts.
    2. Select the relevant host, and then select the Edit icon.
    3. On the Host Properties screen, select the LUNs tab.
    4. Select Modify Host LUN IDs.
    5. On the Modify Host LUN IDs screen, under LUN ID, set the relevant numeric value.
      To configure a bootable LUN, set the value for the relevant LUN to 0.
    6. Click OK.